GSM alarm accessories
Wireless vibration detector shock sensor for alarm system
2015-05-30 15:48:45
Wireless vibration detector shock sensor for alarm system 
 

Feature

•The wireless vibration sensor door magnetic of the entry and send a alarm to scare the intruder
•It is quite convenient and easy to use, affix the mian unit of entry alarm at the side of the door
•It can be easily mounted to windows or doors, no tools required

•Extremely loud instant alarm
•Rated Voltage: DC 12V

•Output Time: 0.5ms~50ms

 

Technical specifications

 

Vibration sensor sensitivity

 high--middle--low  

Working voltage

12VDC

Touching max working voltage

60 VDC

Max current

 20mA

Mini current

10mA

Pulse output time

 5mS~50mS

Sensitivity adjusted

 High (H), Middle (M), Low (L)

Standard package

 Including one transmitter and one good vibration sensor

 

 

Instructions

 

1. Program the vibration sensor to the panel 
A. Open the sensor, take out the insulating sheet beside the battery. The sensor can work normally then. 
B. Program the panel to leaning status 
C. Triggering the vibration sensor by knocking on/beside to the unit (you can also press the tamper button on the main board) the LED will flash (transmiting signal), the panel receive the sensors siganl, select zone then store it. The vibration sensor can communicate to that panel now. 

2. Installation (2 ways) 
A. Use the screw to fix it to desired place 
B. Use the double adhesive tape to simply glue it to desire place 

3. Sensitivity adjustable 
6. The Low Battery Voltage transmitting 
Note: The wireless senor has got a unique power-saving function, After 3 successive time triggering, it will stop working. Only after confirming that there is no vibration, shock or impact for 70 seconds continuously, the detector will then start working again. 

4.Installing and testing: How to reduce the false alarm, advantage over door contact and directional PIR 
1. When installin on the door, The vibration sensor can alarm before intruder break in, while the door contact alarm after that, 
2. When installing on the window, it can alarm when the intruder moves or break the window 

Note: It can not be installed where vibration often occurs 
Pay attention to test when alarming: E. G. When installing it on the door, after that, knock the door, adjust the senstivity, mimic the normal knocking, make sure it would not alarm. Make it alarm when knocking it voilently 
When installing it on the window, make it alarm when the window moves about 20cm 3. Program the vibration sensor to the panel 
A. Open the sensor, take out the insulating sheet beside the battery. The sensor can work normally then. 
B. Program the panel to leaning status 
C. Triggering the vibration sensor by knocking on/beside to the unit (you can also press the tamper button on the main board) the LED will flash (transmiting signal), the panel receive the sensors siganl, select zone then store it. The vibration sensor can communicate to that panel now. 

5. Installation (2 ways) 
A. Use the screw to fix it to desired place 
B. Use the double adhesive tape to simply glue it to desire place 

6. Sensitivity adjustable 


7. The Low Battery Voltage transmitting 
Note: The wireless senor has got a unique power-saving function, After 3 successive time triggering, it will stop working. Only after confirming that there is no vibration, shock or impact for 70 seconds continuously, the detector will then start working again. 

Installing and testing: How to reduce the false alarm, advantage over door contact and directional PIR 
1. When installin on the door, The vibration sensor can alarm before intruder break in, while the door contact alarm after that, 
2. When installing on the window, it can alarm when the intruder moves or break the window 

Note: It can not be installed where vibration often occurs 
Pay attention to test when alarming: E. G. When installing it on the door, after that, knock the door, adjust the senstivity, mimic the normal knocking, make sure it would not alarm. Make it alarm when knocking it voilently 
When installing it on the window, make it alarm when the window moves about 20cm

Home